18
Installing the Vent Mount:
IMPORTANT!
To make the cable connections easier, wait until after you have
connected all the cables to the dock before you attach the Vent Mount to a vent .
1.
Locate a vent with horizontal louvers sturdy
enough to hold your
Power
Connect Vehicle
Dock and Radio .
2.
If the vent louvers in your vehicle are
recessed, you may need to use the longer
vent clamps with the Vent Mount . If so,
remove the shorter vent clamps and install
the longer ones into the Vent Mount . Be sure
to observe the orientation of the vent clamps
as shown, and replace both vent clamps .
Vehicle Installation
Extended Vent Clamps
Short Vent
Clamps
Vent Mount
Rear View
Round End
Orientation
Vent Mount Rear View
Slide Left Clamp to
Hole in Center
Pull Clamp Out
Towards You
Insert Round End
of the Extended
Clamp in the
Center Hole
Slide Clamp to Left
to Complete
Installation
Repeat to Replace
Right Clamp
