33
SUV:
1.
Feed the antenna cable underneath the rubber weather stripping of the
rear tailgate window/door and route the cable along the rear hatch . Lift the
weather stripping from the opening and tuck the cable inside it, then replace
the weather stripping . Pull the cable out from weather stripping and route it
into the cabin under the interior trim . Avoid hinges or gears that could crimp
or cut the cable .
2.
Route the cable through the SUV’s main cabin area under the interior
trim, towards the front of the vehicle . Use a blunt plastic putty knife or
similar blunt tool to lift the plastic trim just enough to tuck the cable under
underneath . Avoid side airbag locations on back pillars and above the doors .
Airbag locations are marked with “SRS” logos . Be careful not to crimp or cut
the cable .
3.
Bring the cable out from the trim near the front of the cabin and route it
under the carpet toward the dashboard or console . Coil any excess cable
in a hidden location, such as under the carpet, keeping it away from any
vehicle pedals or controls . Secure the excess cable with wire ties (purchased
separately) .
4.
Bring the end of the cable out at the
Power
Connect Vehicle Dock location .
Leave yourself enough cable so you
can easily connect it to the antenna
connector of the dock .
5.
Continue with “Step 6: Connect
the Magnetic Mount Antenna and
Power
Connect Power Adapter” on
page 36 .
Vehicle Installation
