33
molding and into the rubber weather stripping around the door
opening . Lift the weather stripping from the opening and tuck the
cable inside it, then replace the weather stripping . Run the cable
inside of the weather stripping to the bottom of the door opening .
4.
Pull the cable out of the weather stripping at the bottom of the door
opening and route it under the carpet toward the dashboard . Coil any
excess cable in a hidden location, such as under the carpet, keeping
it away from any vehicle pedals or controls . Secure the excess cable
with wire ties .
5.
Bring the end of the cable out at the
Power
Connect Vehicle Dock
location . Leave yourself enough cable so you can easily connect it to
the antenna connector of dock .
6.
Continue with “Step 5: Connect the Magnetic Mount Antenna and
Power
Connect Power Adapter” on page 34 .
Vehicle Installation
