29
pillars and above the doors . Airbag locations are marked with “SRS”
logos . Be careful not to crimp or cut the cable .
5.
Bring the cable out from the trim near the front of the cabin and
route it under the carpet toward the dashboard or console . Coil any
excess cable in a hidden location, such as under the carpet, keeping
it away from any vehicle pedals or controls . Secure the excess cable
with wire ties (purchased separately) .
6.
Bring the end of the cable out at the
Power
Connect Vehicle Dock
location . Leave yourself enough cable so you can easily connect it to
the antenna connector of the dock .
7.
Continue with “Step 5: Connect the Magnetic Mount Antenna and
Power
Connect Power Adapter” on page 34 .
Sedan/Coupe With Antenna Placed at the Front of the Roof:
1.
Feed the antenna cable from the antenna underneath the rubber
molding around the windshield . Use a blunt plastic putty knife or
similar blunt tool to lift the rubber molding around the windshield
and tuck the antenna cable underneath the molding . Route the
antenna cable around and down the windshield to the lowest point .
2.
At the lowest corner of the
windshield, route the cable
out of the windshield molding
and into the rubber weather
stripping around the door
opening . Lift the weather
stripping from the opening
and tuck the cable inside
it, then replace the weather
Vehicle Installation