Sirius XM RAdio Snap!, User Manual

Page: 30 / 46

30
Scanning Channels in a Category
You can scan a category and listen to a channel for 10 seconds before the radio
automatically switches to the next channel.
To scan a category:
1 Press the Previous or Next Category button until the desired category is
displayed.
2
Press the Scan button . The scan will begin, and each channel will play for
10 seconds.
3 To stop the scan and tune to the channel currently being played, press the
Scan button again.
Tuning FM Channels
When using
PowerConnect, you can tune to an FM channel to match the FM
channel of your vehicle’s stereo system.
To tune an FM channel:
1 Press the FM button on the top of the Snap!. The FM button illuminate to
indicate the FM transmitter is on, and the display will show the current FM
channel.
2 Rotate the Control knob to select the desired FM channel.
3 To exit, press the FM button or wait 10 seconds until the Snap! exits to the
main display screen.
Using Your Snap!