[
Installation
]
2
SUV/mini-Van antenna Cable Routing Procedure
Figure 15 shows how the antenna cable should be routed from the antenna to your
SIRIUS radio in an SUV or a Mini-Van.
1. Feed Cable Under
Rubber Seal Around
Hatch Opening
3. Route Cable
Under Carpet
to Dashboard
4. Bring Cable Out To
SIRIUS Radio
Location
2. Route Cable Under
Interior Trim, into
Cabin and Towards
Front of Vehicle
Follow these detailed cable installation instructions:
Feed the antenna cable underneath the rubber weather stripping of the rear
tailgate window/door and route the cable along the rear hatch. Lift the weather
stripping from the opening and tuck the cable inside it, then replace the weather
stripping. Pull the cable out from weather stripping and route it into the cabin
under the interior trim. Avoid hinges or gears that could crimp or cut the cable.
Route the cable through the SUV’s main cabin area under the interior trim, to-
wards the front of the vehicle. Use a plastic putty knife to lift the plastic trim just
enough to tuck the cable under underneath. Avoid side airbag locations on back
1.
2.
figure 15
figure 15
Summary of Contents for SUPV1C Plug & Play
Page 1: ...Installation User Guide Plug Play Vehicle Kit...
Page 41: ......
Page 42: ......
Page 43: ......
