Sirius Satellite Radio SUPV1C Plug & Play, User Manual And Installation

Page: 21 / 44

[
Installation
]
21
Sedan/Coupe antenna Cable Routing Procedure
Figure 13 shows how the antenna cable should be routed from the antenna to your
SIRIUS radio in a sedan/coupe.
1. Feed Cable Under
Rubber Molding
Around Window
4. Route Cable from Trunk
Under Interior Trim, into
Cabin and Towards Front
of Vehicle
6. Bring Cable Out To
SIRIUS Radio
Location
5. Bring Cable out from
Trim and Route Under
Carpet to Dashboard
or Console.
2. Route Cable Out of
Window Molding and
Into Weatherstripping
Around Trunk Opening
3. Route Cable Along
Trunk Wall and Into
Cabin
Follow these detailed cable installation instructions:
Feed the cable from the antenna underneath the rubber molding around the
rear window. Use a plastic putty knife or similar object to lift the rubber molding
around the rear window and tuck the antenna cable underneath the molding.
Route the antenna cable around and down the window to the lowest point. If your
rear window does not have rubber molding, SIRIUS recommends consulting with
a professional installer.
Route the antenna cable out of the window molding and into the rubber weather
stripping around the trunk opening. Lift the weather stripping from the opening
and tuck the cable inside it, then replace the weather stripping. To avoid sharp 1.
2.
figure 13 figure 13