background image

5

TO THE ATTENTION OF THE USER

HEIGHT CLEARANCES: 
SLT977EMEL, SLT978EMEL

This rangehood is designed to work with ducted 
outside evacuation

.

Keep these instructions for use with the appliance. If 
the appliance should be sold or passed on to others, 
make sure that the instructions are passed on with 
it. We thank you for taking note of these suggestions 
before installing and using the appliance. They have 
been written for your personal safety and the safety 
of others. 

SAFETY INSTRUCTIONS

These hoods have been designed for personal 
use in the home. The appliance must be used by 
adults. Make sure that the appliance is out of reach 
of children and that they do not use it to play with. 
Make sure that children do not operate the controls. 

•  When the appliance is delivered, check the overall 

appearance of the packaging. 

Check PARTS 

LIST on page 26 for all included parts prior 
to discarding packaging.

 

Any remarks should be written on the delivery 
docket, of which you keep a copy. 
Your appliance is designed for normal domestic 
use. It is not designed for commercial or industrial 
use, or for purposes other than those for which it 
was designed.

•  Any consequences of or damage from incorrect 

installation or incorrect use of the appliance will 
not be covered by the manufacturer’s guarantee.

•  Do not ever change or try to change the 

characteristics of this appliance. This would be 
a danger. Repairs must be performed only by an 
authorised technician.

•  Always disconnect the hood before carrying out 

cleaning or maintenance operations.

•  Adequately ventilate the room when a rangehood 

and other appliances, powered by energy other 
than electricity, are used simultaneously, so that 
the hood does not suck any combustion fumes.

•  It is not allowed to cook food over open flames 

(flambé) or operate gas hobs without pots 
or pans on them under the hood itself (the 
flames sucked into the hood might damage the 
appliance).

•  Frying under the appliance must be done under 

constant supervision as hot oils and fats may 
ignite.

•  Respect the guidelines for cleaning and 

replacement of grease filters. Accumulated 
deposits of grease are a fire hazard.

WARNING

•  This appliance must not be used over cook tops 

powered by wood or coal or in any case, over 
cook tops with power levels that could damage 
the appliance.

•  Never use steam or high-pressure devices 

for cleaning your hood (regulations regarding 
electrical safety).

•  Never use the rangehood without the grease 

filters.

At Sirius, we are constantly seeking to improve 
our products. We reserve the right to modify their 
technical, functional, or aesthetic characteristics 
deriving from their upgrading. 

Motors manufactured and approved by Sirius only 
are to be used at all times. Failure to comply with this 
will result in the forfeit of the manufacturer warranty.
 
The air collected must not be conveyed into a flue 
used for smoke or fumes from appliances powered 
by anything other than electricity (central heating 
systems, bathroom and toilet exhausts, etc.). As 
far as discharging exhaust air is concerned, please 
follow the guidelines given by competent authorities.

Cassette distance: 
Min 900mm - 
Max 1600mm

Light distance: 
Min 700mm

Summary of Contents for 9351116001353































Reviews: