background image

8

•  Accurate maintenance guarantees good 

functioning and long-lasting performance.

•  Particular care is due to the grease filters. 

They can be removed by pushing its handle 
toward the back side of the rangehood and 
pulling the filter downwards so to unfasten it from 
its slot (Fig.3). 
To insert the filter just perform the opposite 
operation.

•  After 30 hours of operation, the push button 

control panel will flash, signaling the filters are due 
for cleaning. Press the timer button to reset. 
The grease filter needs cleaning by regular 
handwashing or in dishwashers every two 
months at least, depending on its use. 

•  Filters may require cleaning sooner if 

frequent heavy cooking is done.

•  To clean the appliance itself, water and detergent 

are recommended, while abrasive products 
should be avoided. For steel appliances 
specialized detergents are recommended (please 
follow the instructions indicated on the product 
itself to obtain the desired results).

MAINTENANCE

Manual control buttons:

SL80FRESCO900
SL80BBQ1200M
SL80BBQ1200B

A:  Light switch on/off 
B:  Motor switch on speed 1/off - (low/simmer)
C:  Motor switch on speed 2 - (general cooking)
D:  Motor switch on speed 3 - (high power)
E:  Motor switch on speed 4 - (booster)
F:  10 minute shut-off timer

OPERATION

11. Telescope the upper flue cover over the bracket 

and secure in place with the 

very small 10mm 

supplied screws.

 (Fig 8.)

(Fig. 8)

10mm

Summary of Contents for 9351116000950













Reviews: