7
(Fig. 6)
NOTE: Model measurements will vary.
Please check specific model specs.
4. Using an 8mm drill bit, pre-drill the holes that
will hold the bracket to the wall. (Using bracket
template)
5. Insert the supplied plastic dowels to the
pre-drilled holes and fix bracket to the wall with
the supplied screws. (Note: Please use a spirit
level to make sure the bracket is perfectly level.)
6. Once the bracket is secure, using two people,
lift the hood and drop the horizontal support bar
onto the fixed bracket (Fig. 5).
(Note: There are additional holes on the inside of
the hood to secure the rangehood flush to the wall
and completely stable. (Hole locations will vary per
model.)
7. Connect your Sirius ducting
(see
www.siriusbrand.com
for approved
ducting) to the outlet collar on the rangehood and
secure in place with a ring clamp if you are using
semi rigid ducting. If you are using solid/rigid
ducting, an external duct connector is required.
(Note: do not fix the ducting in place with screws
as they will prevent the movement of the non-
return valves). (See Fig. 2 for ducting options).
Complete all of the duct work to the atmosphere
before fixing the flue covers in place to ensure the
ducting has not come free.
(Fig. 5)
8. Insert the upper flue cover into the lower flue
cover and mount into the channel on the top of
the rangehood. There are two spring loaded clips
that need to be on the inside of the lower flue
cover to secure in place. (Fig 6.)
9. Telescope the upper flue cover to the ceiling and
mark with a pencil the outer line of the cover, this
will give you the exact location of where the top
fixing bracket needs to be fitter to the ceiling.
10. Fix the top fixing bracket into place using the
supplied
30mm screws
(Fig.7).
(Fig. 7)
30mm
NOTE
Please do not fix shroud permanently.
Must be removable for servicing purposes.
