Customer Service 1-888-707-1880
or email [email protected] Dyaco Canada Inc. ©2013
8
STEP 5
Attach the stationary handlebar (39) to the back of the upright (22). Secure using two allen
screws (23) and two curve washers (7).
Remove the grommet (47) form the upright (22) and insert the hand pulse wires (46) through the
grommet (47) and slide up through the opening of the upright (22).
STEP 6
Connect the pulse wires from the monitor (38) to the pulse wires (46).
Connect the sensor wire from the monitor (38) to the extension sensor wire (26).
Attach the monitor (38) to the top of the upright (22) and secure using four screws (48) which
were pre-assembly on the computer.
Note: Ensure that the wires are away from the bracket when sliding onto the computer.
Attach the Left Pedal (13L) to the left pedal tube (9L) and secure using two sets of carriage bolts
(14) , washer (17) and nylon lock nut (16) .
Noted: The pedal position is optional. Normally, please attach the pedal by first two holes. If you
attach the pedal by last two holes, please don’t touch the crank & chain cover by fingers during
exercise.
Repeat for the right pedal (13R).
46
26
1
38
13R
13L
14
17
16
17
16
14
47
1
7
23
46
39
22
