Customer Service 1-888-707-1880
©2009
7
Step 5
a) Slide the seat support bracket (9) onto the aluminum rail (14). Secure using the quick release knob
(20) into your desired position. Connect the upper coil pulse wire (50) to the back pulse wire (52).
b) Fix two bumpers (32) on each side of aluminum rail (14). Secure using two allen bolts (31).
c) Attach the right and left end caps (56L / 56R) onto the end of the aluminum rail (14).
d) Connect the upper extension pulse wire (44), to the back of the monitor (10).
Connect the sensor wire (45) to the back of the monitor (10).
Connect the rower sensor wire (46) to the back of the monitor (10).
Attach the computer (10) to the bracket of front post of the main frame (1). Secure using two screw
(38) which are found on the monitor.
Note:
Ensure that the wires are safely tucked inside the opening so that the wires do not get pinched
when inserting the monitor onto the monitor bracket.
Ensure that that you have fastened the bolts securely.
You have completed the assembly of your cycle.
