SIRI Maxi Bella 105, Operating And Maintenance Manual, Page: 31 / 36

23/24
1.0
M
axi
B
ella
75 M
axi
B
ella
105
5
Charter::
Page:: Release::
F
Fig. 16
1
F
Fig. 15
3) Release the motor support with special threaded bar and screw (F Fig. 15).
5.3 ELECTRICAL CONNECTIONS
All connections to the mains must be made with this disconnected
and by qualified and explicitly authorised personnel in accordance
to the standards in force.
Make sure the voltage and frequency ratings of the power supply line fulfil the machine’s
requirements, which are indicated on the machine nameplate or wiring diagram.
Connect the machine to a distribution board featuring a protection fuse capable of protecting
the machine in the event of short-circuits or insulation failures.
Connect the socket (1) of the cutter to a 110-230 V power supply (Fig. 16).
Depending on voltage (see CE rating plate).