SIRI Maxi Bella 105, Operating And Maintenance Manual, Page: 17 / 36

29/24
1.0
M
axi
B
ella
75 M
axi
B
ella
105
8
Charter::
Page:: Release::
8 ADJUSTMENT AND MAINTENANCE
Carefully read these instructions, before performing any maintenan -
ce and adjustment on the accessories; this will guarantee safer wor -
king conditions for the personnel involved and a greater reliability
of the interventions made.
8.1
ADJUSTMENT
Adjusting flow of water to disc
Flow of water to disc can be adjusted by acting on the tap (A).
The direction of the water flow can be controlled by loosening the knobs on either sides (B)
and moving the flow to the right or the left, according to whether you wish to direct the water
onto the disc or onto the piece to be cut (Fig. 19).
8.2 MAINTENANCE
When servicing, observe the following rules:
- Maintenance operations must be effected by qualified and authorised personnel only;
- Make absolutely sure that the electricity supply is isolated, in order to prevent any
accidental restarting.
- After turning off the machine, wait 5 minutes for the motor to cool down;
- make sure the work environment is suitable and equipped with the items needed;
Correct periodic maintenance will maintain your machine in perfect working order.
Apart from periodic maintenance on the various accessories, keep the machine and
surrounding area clean and tidy.
Fig. 19
B
A