SIRI Maxi Bella 105, Operating And Maintenance Manual, Page: 15 / 36

11/24
1.0
M
axi
B
ella
75 M
axi
B
ella
105
Charter::
Page:: Release::
Fig. 3
1
Fig. 4
3
2
B
A
S
C
4
2.4 opeRaTionT
lineaR CuT
l
inear cuTs are performed as follows
:
1) p
ush The sliding carriage To The side opposiTe To The operaTor
,
unTil iT sTops
(f
ig
. 3).
2) p
uT The Tile on The sheeT meTal Table
(f
ig
. 3).
3) Adjust the cutting measurement with the help of the square (S, Fig. 4):
- loosen knobs (A and B) and position square on the basis of the cut to perform;
- tighten knobs (A and B) and clamp square in place.
4) Lock motor unit in its lowered position using knob (C Fig. 4) on right hand side of carriage
2