SIRI MIX
1.0
Chapter:
Page:
Release:
10/17
3
i
nStallation
3.1 TRANSPORT
To facilitate transportation the machine is packed and stored inside a strong cardboard box
to protect it from possible impacts.
When repositioning on site, keep to the following instructions:
1 - Disconnect the machine from the power supply.
2 - Grip the handle on the side opposite to the operator.
3 - Lift the machine on the front wheels and position at will.
CAUTION
D
o not move the machine before disconnecting the power supply, pressing the “0”
button of the switch and removing the plug from the panel socket.
3.2 INSTALLATION
CAUTION
It is the user’s responsability to ensure that installation is
carried out in compliance with local regulations
The machine must be installed by a skilled person who has
read carefully and understood the information given in the
present manual.
All directions given concerning installation of the
machine must be followed with care.
For any doubts regarding installation, contact
the maker without delay.
There are certain fundamental rules to be observed when installing the machine:
Firstly two people are required to remove the machine from the carton box.
The machine must then be positioned on a flat surface, making certain that there is sufficient
room on all sides both for normal freedom of movement and for mixing operations.
Always check that the line voltage at the panel is the same as the rated voltage given
on the motor data plate.
Never connect the machine to a power supply that is not properly earthed. This could
result in a
SEVERE AND POTENTIALLY FATAL ELECTRIC SHOCK.
Never use the machine on any surface that is not level. Operating the mixer in such
conditions can be very dangerous.
