TI03-328ENG-REV5
8 of 12
5. Press the CAM B switch and center the image under the lens (see Figure 3). Zoom to full image size
with the Channel B Zoom Control. Adjust Channel B Focusing Jack for sharpest focus.
6. Turn the MIX control knob to its mid-range setting.
7. Press the L/R Switch for vertical split-screen mode and adjust the MIX control knob to achieve the
desired split ratio. The previously centered
images will now be split in half with CAM A
image left and CAM B right (see Figure 4A).
This split would be ideal for comparing one
side of an image to the other. However, for
the purpose of comparison, re-center the prints
within the split frame and zoom as necessary
(see Figure 4B).
8. Press the T/B Switch for horizontal split-screen
mode and adjust the MIX control knob to
achieve the desired split ratio. The repositioned
images will now be split top-to-bottom with
CAM A image on top (appearing slightly to the
left), and CAM B on the bottom and slightly to
the right (see Figure 5A). However, for the purpose of comparison, re-
center the prints within the frame in CAM A and CAM B modes—zoom
as necessary (see Figure 5B).
9. Press the FADE Switch with the MIX control knob at its midpoint range.
CAM A image is now superimposed on top of CAM B (see Figure 6A).
Adjust the amount of FADE by turning the MIX control clockwise to
enhance CAM A image or counterclockwise to enhance CAM B. If the
FIGURE 4A
FIGURE 4B
FIGURE 5A
FIGURE 5B
FIGURE 6A