TI03-328ENG-REV5
2 of 12
of a variety of items of forensic interest. The laboratory-grade focusing jacks permit viewing of both two-
dimensional and three-dimensional objects, and the optics offer exceptional depth of field even when viewing
curved surfaces. Not only do you get both vertical and horizontal split screens for evidence comparison, you
also have the ability to overlay (superimpose) one image over another.
CAUTIONS
• HAZARDOUS VOLTAGES ARE PRESENT INSIDE THE UNIT.
Should it become necessary to
remove the access panel, be certain that power has been disconnected.
• Prior to connecting power to the unit and/or use, please read through and follow the instructions.
• The unit and the monitor both accept a power source of 110-220V AC, 50/60 Hz and auto-sense the ap-
plied input voltage.
FX10A and FX10AC CONTROLS
1. ZOOM CONTROL:
Controls Channel A magnification.
2. ZOOM CONTROL:
Controls Channel B magnification.
LOWER/FRONT CONTROL PANEL:
3. POWER:
Master Power ON/OFF control.
4. LIGHTS:
Activates both fluorescent lights.
UPPER CONTROL PANEL:
5. CAM A:
Activation shows 100% of Camera A image in display. Red indicator will light to right of switch.
6. CAM B:
Activation shows 100% of Camera B image in display. Red indicator will light to right of switch.
7. L/R:
Activation splits screen vertically with CAM A image on the left and CAM B image on the right;
adjust amount of split with MIX control. Green indicator will light to right of switch.