TI02-134ENG-REV4
2 of 8
3 of 8
2. Assemble center divider as-
sembly to bottom with three
6-32 x 1/4" pan head screws
(Fig. 2).
3. Lay the top upside down on
the work surface. Attach the
end caps with two 6-32 x
3/8" black pan head screws,
#6 washers and 6-32 hex
nuts. Slide the two end pan-
els in place on the assembled
bottom. Set this entire bottom
assembly onto the studs pro-
truding from the top. Secure
with eight #6 lock washers
and 6-32 hex nuts (Fig. 3).
For Table Model Benches
(FPT274A, FPT274PIP,
FPT275A, FPT275APIP,
PFT100A, PFT100APF, PFT100ACM, PFT200A, PFT200APF, PFT200ACM)
4a. With the unit upside down, secure the end panels to the back with six 6-32 x 1/4" pan head screws.
Secure the end panels to the bottom with four 6-32 x 5/8" pan head screws. Attach the rear feet with
two 6-32 x 5/8" pan head screws. Attach the front feet with two #6 x 5/8" sheet metal screws. The
unit is now ready for use (Fig. 4a).
Note: Optional wall mount configuration also shown
.
FIGURE 2
SFL1008
Center
Divider
SFL225
SFL1006
Bottom
SFL1007
Back
