1
SA Fixed Series - Installation manual
Preserve this manual as a reference for future needs.
Used electrical, electronic and stainless steel products should not be mixed with
general waste. For proper treatment, recovery and recycling of old products,
take them to applicable collection points, in accordance with your national
legislation and the Directives 2002/95/EC and 2002/96/EC.
By disposing of these products correctly, you help to save valuable resources
and prevent any potential negative effects on human health and the
environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products, contact
your local municipality or your waste disposal service. Penalties may be
applicable for incorrect disposal of this waste, in accordance with national
legislation.
The manufacturer declines all liability for any consequence resulting from improper installation
practices, tampering or improper uses of the product.
The descriptions and illustrations contained in this manual are not binding. The manufacturer
reserves the right to make any alterations deemed appropriate for the technical,
manufacturing and commercial improvement of the product, while leaving the essential
product features unchanged, at any time and without undertaking to update the present
publication.
The manufacturer declines all responsibility for any consequences resulting from improper use
of the product, or use which is different from that expected and specified in the present
documents.
In This Chapter
1.1
Description
SA Fixed Series housings are made in AISI316L stainless steel to protect CCTV cameras in
outdoor locations, especially where corrosive environment can cause the premature
deterioration of a standard aluminium/plastic camera housing.
1.2
Models
SA-BC36 F
316L analogue fixed camera station, 36x zoom lens
SA-BC820H1 F
316L IP 1080p fixed camera station, 18x zoom lens
SA-TC620-PID F
316L IP Ti fixed camera station, Perimeter Intrusion Detection
3
