Siqura IFD820 Series, Installation Manual, Page: 23 / 28

Installation
Page 21
9. Attach the snap-on camera module to the dome camera’s housing/plate. Install the camera
module with the terminal blocks facing the side cable entry.
10. Tighten the module-fastening screw.
11. Connect the Ethernet cable to the camera’s network connector. Refer to Connectors and
Reset Button (on page 11) for details regarding the camera connector definition.
12. Access the camera browser for viewing images. Please refer to the Siqura IFD820's user
manual for further details. Users can also use the camera’s BNC connector for video output.
13. Adjust the Siqura IFD820's lens and adjust the its zoom level and focal length via the zoom
and focus ring screws.
Note:
The zoom level and focal length might be different with the dome cover on. In this
case, we recommend adjusting zoom level and focal length through the dome cover.