Siqura IFD820 Series, Installation Manual, Page: 22 / 28

IFD820 Series
Page 20
6. Position the supplied adhesive-backed ceiling sticker (Diameter: 176 mm) onto the ceiling
where the camera will be mounted, and cut the ceiling hole using the template as a guide.
7. Insert the dome camera with the attached in-ceiling mount into the opening and run the
Ethernet cable through the desired cable entry.
8. Secure the Unit to the ceiling
Note:
Do Not over-tighten the three fixing screws. If using a power tool, the slip clutch
should be set to the lightest setting or the clamps could be damaged.
The in-ceiling mount’s wing clamps will draw the dome camera’s housing/plate to the ceiling
board until it is completely flush with the board.
Bottom views of installed in-ceiling mount