Siqura IFD820 Series, Installation Manual, Page: 21 / 28

Installation
Page 19
2. Press both sides of the inner cover and remove it from the camera module.
3. Unscrew the module-fastened screw, as indicated in the figure, with the screw driver.
4. Press the sides of the snap-on camera module, as indicated in the figure, and detach it from
the dome camera’s housing/plate.
5. Attach the camera housing/plate’s base to the in-ceiling mount’s top plate, aligning the
camera’s rear cable entry with the entry hole on the in-ceiling mount’s top plate.
Align the three captive screws with the mating screw holes on the dome camera’s
housing/plate’s base. Then tighten the three captive screws as shown in the figure.