6
Position the supplied adhesive-backed ceiling sticker (Ø176 mm) onto the ceiling where
the camera will be mounted, and cut the ceiling hole using the template as a guide.
7
Insert the dome camera with the attached in-ceiling mount into the opening and run the
Ethernet cable through the desired cable entry.
8
Secure the Unit to the ceiling
Do Not over-tighten the three fixing screws. If using a power tool, the slip clutch should
be set to the lightest setting or the clamps could be damaged.
The in-ceiling mount’s wing clamps will draw the dome camera’s housing/plate to the
ceiling board until it is completely flush with the board.
Install the camera
29
