SIP 08970 Product Manual Download Page 9

EN

9

(it is extremely important to protect these 

components against damage by avoiding their 

improper use and protecting them against 

bending, knocks and scratches).

 09WARNING: Appliances not equipped with 

T.S.

 – Total Stop : must not be left in operation for 

more than 2 minutes with the gun released. The 

recycled water heats up considerably, seriously 

damaging the pump.

 10WARNING: Appliances equipped with 

T.S.

– 

Total Stop : these appliances should not be left in 

standby for more than 5 minutes.

 11WARNING: Switch the appliance off complete-

ly (master switch on (0)OFF) whenever it is left un-

attended.

 12WARNING:  Every machine is tested in its oper-

ating conditions, so it is normal for a few drops of 

water to be left inside it.

 13WARNING: Take care not damage the electric 

cable. If the supply cord is damaged, it must be 

replaced by the manufacturer, its service agent or 

similarly qualified persons in order to avoid a haz-

ard

 13b  WARNING:  The power cord should not be 

used to pull or lift the machine.

 14WARNING: Appliance with fluid under pres-

sure. Keep a firm hold on the gun and be prepared 

to take the kickback pressure. Only use the high 

pressure nozzle provided with the appliance.

 16WARNING: This appliance is not intended for 

use by persons (including children) with reduced 

physical, sensory or mental capabilities, or lack of 

experience and knowledge.

 17WARNING: Children should be supervised to 

ensure that they do not play with the appliance.

 18WARNING:  Never start the high-pressure 

cleaner without first completely unwinding the 

high-pressure hose.

 19WARNING: When winding and unwinding the 

pipe take care not to cause the high-pressure 

cleaner to overturn.

 20WARNING:  Before unwinding or winding the 

hose, switch the machine off and release the pres-

sure in the hose itself (switching off).

 21WARNING: Risk of explosion — Do not spray 

flammable liquids.

 22WARNING: To ensure machine safety, use only 

original spare parts from the manufacturer or ap-

proved by the manufacturer.

 23WARNING: Do not direct the jet against your-

self or others in order to clean clothes or foot-

wear.

 WARNING: Water that has flown through back-

flow preventers is considered to be non-potable.

• 

XX WARNING: the machine shall be disconnect-

ed from its power source, by removing the plug 

from the socket-outlet, during cleaning or main-

tenance and when replacing spare parts 

• 

XJ WARNING: If an extension cord is used, the 

plug and socket must be of watertight construc-

tion.

• 

XY WARNING: Inadequate extension cords can 

be dangerous.

>  SAFETY  DEVICE

 WARNING: the gun is fitted with a safety catch. 

Whenever use of the machine is interrupted it is 

important to operate the safety catch to prevent 

accidental activation of the jet.

-  Safety features: gun equipped with safety locking 

device, appliance equipped with (Class I) over-

load cutout, pump equipped with by-pass valve 

or shutdown device.

-  The safety button on the gun is not there to lock 

the lever during operation, but to prevent its ac-

cidental operation.

 WARNING: The appliance is equipped with a mo-

tor protection device: in case of device interven-

tion, wait some minutes or, in alternative, discon-

nect and re-connect the product to the electric 

system. In case this problem repeats again or if 

the product does not start again, take the product 

to the nearest After Sales Service Point

>  STABILITY  

 WARNING: 

 The machine must be always kept on hori-

zontal bases, in a safe and stable way.

USAGE

>  DESCRIPTION OF THE MACHINE

   See  the specific instructions manual provided.

>  ASSEMBLY INSTRUCTIONS

   See  the specific instructions manual provided.

>  WATER SUPPLY

   Water supply collection

Water supply from the water main

-  Connect a supply hose (not included) to the water 

inlet of the unit and to the water supply.

-  Open the water supply.

 WARNING: (symbol) machine not suitable for 

connection to the potable water mains.

Summary of Contents for 08970

















Reviews: