SIP 08970 Product Manual Download Page 13

1,5 m/s

2

K (uncertainty) 

0,5 m/s

2

• SIP warrants its products for 12 months 

from the date of purchase.
• In accordance with the above-mentio-

ned terms, SIP agrees to furnish free of 

charge any replacement parts for such 

parts as, in the Manufacturer's opinion 

or that of their authorized representa-

tive, are defective either in material or 

manufacture. In any case transport and 

labour costs shall be charged to the cu-

stomer. 
• The product returned to SIP or au-

thorized representative for warranty 

inspection or repair must be sent back 

together with each single part the unit 

is complete with and must not have 

been improperly damaged. SIP will 

otherwise decline all responsibility for 

any warranty claims. 
• The warranty does not include any 

payment for faults due to incorrect usa-

ge by the operator and for parts falling 

within the usual maintenance, such as: 

Gaskets, diaphragms sealing rings, oil 

and so on. 
• The Manufacturer shall not be held re-

sponsible for accidents to the operator 

or third parties while the equipment is 

in use. 

• This warranty shall not be valid if:

a) previous service or repairs were per-

formed by unauthorized 
individuals or companies.

b) the equipment was previously re-

paired with non-original parts. 
• Breakdowns and failures in our ma-

chines during or after the warranty 

period, do not grant any right to su-

spend payments for the goods delive-

red which have already been agreed 

to. Nor can such breakdowns and fai-

lures be used to excuse further delay 

in such payments. 
• The Manufacturer reserves the right 

at any time to carry out any and all 

changes to improve his products. Nor 

shall he be obliged by this to add such 

improvements to units previously ma-

nufactured, already consigned or in 

the process of installation. 
• These general conditions of warran-

ty hereby substitute and nullify every 

previous condition expressed or impli-

cit.

WARRANTY CONDITIONS 

Arm vibrations

13

Summary of Contents for 08970

















Reviews: