14
EXPLODED DRAWING - 06801
11
Note:
If the delivery tank is higher than the pump it may be necessary to fit
an anti siphon valve to prevent any fuel loss / leaks.
OPERATING INSTRUCTIONS
POSITIONING THE PUMP
Note:
Never operate the pump without the inlet filter fitted.
OPERATING THE PUMP
Ensure all pipes etc. are fitted as described, and the suction hose (with filter) is correct-
ly positioned in the fuel tank.
Connect the power input leads as described on page 7.
Insert the delivery nozzle into the container to be filled.
Switch the motor on.
Operate the nozzle lever to dispense fluid.
The pump can be installed in any direction - Pump axis vertical or horizontal.
The pump base should be fixed to a secure surface using the holes provided (Fig. 4).
The pump should be installed so that the suction height is as low as possible - maxi-
mum of 2 metres.
Place the suction hose into the fuel tank so that the filter sits well below the fuel level.
Note:
Depending on the height of fuel / length of hoses etc. The pump will
need to prime before the fuel will be pumped.
