Form Z823
3
Date
2016November29/B
For Angle Head
Lubricate the angle head assembly with 2 shots of SIOUX #1232A grease every 8 working hours.
MAINTENANCE
Water, dust and other airline contaminants can cause rust and vane sticking. For long periods between tool use, flush the tool with a few drops of oil and run
for 10 seconds. This will help remove contaminants and reduce the formation of rust.
OPERATION
The tool is equipped with a locking type lever in order to prevent accidental start-up.
Speed of the tool may be adjusted by turning the regulator, which is located opposite the throttle lever.
The angle head can be repositioned by loosening the retaining collar and positioning the angle head in the desired position and retighten the retaining collar.
INSTALLING GRINDING WHEELS
Place Wheel Flange and wheel on spindle.
Thread Wheel Retainer onto spindle.
Tightened Wheel Retainer with enclosed spanner wrench while holding spindle with enclosed open end wrench. Tighten Wheel retainer to a maximum of 120
in-lb.
REMOVING GRINDING WHEELS
Unthread Wheel Retainer and remove wheel.
Guard
Wheel Flange
Wheel
Spindle
Wheel Retainer
NOISE AND VIBRATION READINGS
Catalog
Number
Noise* (Tested in accordance with ISO Standard 15744)
Vibration* (Tested in accordance with
ISO Standard 28927-1:2009)
*Sound Pressure (dBA)
*Sound Power (dBA)
Uncertainty (dBA)
*Vibration m/s^2
Uncertainty m/s^2
SEBS1AX124G
87.5
99.1
3.0
2.92
0.06
WARNING
Disconnect tool from air supply before installing or removing wheel or making any adjustments
