6
version 1.0
6. Terms of warranty
1. Sinterit Sp. z o.o. company hereinafter referred to as the Seller, guarantees to the Buyer the correct func-
tioning of SINTERIT Sieve 12 months) on the basis described below.
2. The remaining liability of the Seller, including the warranty for defects in the product is
3. The device should be used in accordance with the manual provided.
4. The holder of the original, properly completed Warranty Card or the proof of purchase (invoice, receipt) of
the Sieve is entitled to guarantee.
5. Requirements for warranty coverage are as follows:
a. statement of claim in the written form within the period of 14 days of failure occurrence and not using
the sieve from the discovery of the defect;
b. sending your application together with the data downloaded by the application supporting the sieve
with a copy of proof of purchase/Warranty Card;
c. Sinterit Sp. z o.o. determines the method of repair as follows:
• commissioning a simple repair to the Buyer (sending the necessary parts and instructions);
• sending the device at the expense of Sinterit Sp. z o.o. to the service indicated by Sinterit Sp. z o.o.,
the Buyer is responsible for the Sieve’s safe packing;
• Sieve exchange for a new one.
d. In the event of an error for reasons of misuse of the Sieve, Sinterit Sp. z.o.o. surcharges the Buyer with
the costs of repairs, parts, and transport of equipment.
e. Within 14 days of filing the complaint Seller shall notify the Buyer about the way it has been handled.
f. The warranty period shall be extended by the time repair.
6. The risk of accidental loss or damage to the Sieve from the time its release or dispatch to the Seller charges
the Buyer.
7. In case the equipment sent for repair under warranty is unjustified, the Buyer shall be charged the costs of
transport in both directions and inspection costs of the device according to the price list.
8. Sinterit Sp. z o.o. reserves the right to change the terms of the warranty. The new warranty will not be ap-
plied retroactively to previously purchased products.
7. Exclusion of warranties
1. The warranty does not cover the maintenance parts: removable sieve.
2. The warranty does not cover printing powder.
3. The warranty does not include the right holder of the warranty to claim reimbursement of lost benefits due to
defects of the device. Sinterit Sp. z o.o. is not responsible for damage to property caused by a defective product
4. The warranty also does not cover:
a. damages arising from chance events/unforeseeable circumstances (electrical fault, fire, inundation,
flood, etc.);
b. mechanical, chemical fault and defects caused by them;
c. damage resulting from installation and operation the device under conditions or in a manner incom-
patible with the manufacturer’s specifications, and used against safety regulations;
d. damage caused by the fault or by the user’s lack of knowledge;
e. activities described in the manual, the holder of a guarantee is required to do on their own and at their
own expense;
f. transport damage caused during moving the device to the service indicated by Sinterit Sp. z o.o., in par-
ticular, when for transporting non-original packaging without transport security was used;
g. damage arising from the use of other supplies than those recommended by Sinterit Sp. z o.o.;
h. damage and malfunctions resulting from repairs, alterations, fine-tuning or structural changes made
without the written consent of Sinterit Sp. z o.o. or outside the service station indicated by the men-
tioned above company;
i. where it is found by the Sinterit Sp. z o.o. that the violation of the seals placed in the sieve and compo-
nents included has taken place or the incompleteness of the device.
