10
version 1.0
13. Important safeguards and warnings
To ensure safe use of the SINTERIT SIEVE product, please read and follow the instructions below.
Keep this manual for future use. Also, be sure to follow all warnings and instructions marked on the product.
WARNING!
• Only trained and qualified personnel should install, replace or service the equipment.
• The device should be installed in accordance with these instructions and by trained personnel
A) Environment and the place of installation
• The SINTERIT Sieve should be placed at room temperature.
• The product should be placed on a flat, stable surface that extends beyond all edges of the product. If you place
the product by the wall the distance between the product and the wall should be greater than 50 cm (20 in).
• The product will not work properly if it is set at an angle.
ATTENTION!
Do not place or store the product:
• outdoors;
• in areas with high dust;
• in places subject to shocks, vibrations, high temperature and/or humidity, and extreme
changes in temperature and humidity;
• near water, or heat sources;
• near inflammable and volatile substances, concentrated acids or corrosive vapors;
• in places easily accessible to children and animals.
B) Power supply:
• Use only the power supply that meets the power and safety conditions.
• When connecting/disconnecting the plug to/from the power source always hold the cover, not the cord.
WARNING!
Do not use cables from other devices. Using the power cables from other devices or con-
necting the power cord supplied with the product to other devices may cause a fire or
electric shock.
