18
Operation And Display
No
Instructions
Name
Code
display
zone
4
When the frequency source A or B is set to 1, the setting of the
frequency source is determined by analog potentiometer input
voltage.
3
oten-
tiometer
P
Five-figure LED display displays various monitoring date and
alarm code such as set frequency and output frequency.
Keypad
buttons
zone
5
Program key
Confirm key
Increment
Shift key
Run key
Stop
eset
key
/R
S key
Enter or exit Level I menu.
Increase data or function code progressively
Decrease data or function code progressively
Move right to select the displaying
parameter circularly in stopping and running
mode. Select the parameter modifying digit
during the parameter modification.
The key used to operate the AC drive in
keypad operation mode.
The function of this key is confirmed by
function code F06.01
Decrement
This key is used to stop in running status
and it's limited by function code F06.03.
This key used to reset all control modes in
the fault alarm state.
Enter
the
menu
interfaces
level
by
level
,
and
confirm
the
parameter
setting
3.2 Viewing and Modifying Function Codes
The operation panel of inverters adopts three-level menu.
The three-level menu consists of function code group (Level I), function code
(Level II), and function code setting value (level III), as shown in the following
figure.Figure 4-2 Operation procedure on the operation panel.
Operation
procedure on the operation panel:
