VGA
HDMI 2
PC IN
RF
AUDIO
HDMI 1
Antenna Connection
·
Connect one end of your antenna cable to the
RF
jack on the back of the
TV and connect the other end of the cable to the antenna wall jack.
Note:
=
It is recommended that the 75-ohm coaxial cable is used to eliminate
interference and noise which may occur due to radio wave conditions.
=
The antenna cable should not be bundled with the power cord and the like.
=
If the antenna is not installed properly, contact your dealer for assistance.
Power Connection
Note:
=
This product should be operated only from the type of power source indicated on
the marking label.
=
Always unplug the AC cord from power outlet when not using for a long period of
time.
=
This illustration is for reference only. The AC plug may be different on different
models.
Connections
=
When connecting an external device to the TV, make sure that the TV and the device is turned off.
=
Check the plugs on the ends of the cables to make sure that they are the correct type before you try to plug them into the jacks on
the TV.
=
Make sure that all plugs are securely inserted into the jacks. Loose connections can result in image or color problems.
=
The illustration of the external device may be different depending on your model.
=
Refer to the operating manual of the external device as well.
Cautions Before Connecting
8
Connect the power cord to the
AC IN
socket on the back of the TV, then
connect the other end to a power outlet.
75-ohm coaxial cable
(round cable)
AC
cord
Household
power outlet
