SingTel SingNet eVolve Business Fibre Broadband Troubleshooting Manual Download Page 12

Page: 12 / 17

ZTE F620G:

LED Name

Status

Description

Power

Green The ONT power is on.

Off

The ONT power is off.

PON

Green The ONT is registered successfully.

Blink

The ONT is in the process of registration.

Off

The ONT failed to be registered or the system is not on.

LOS

Red

The ONT is receiving optical signals abnormally. Please contact 1606.

Off

The ONT is receiving signals normally.

ALARM

Red

The ONT is inactive or in fault. Please contact 1606.

Blink

Software download/upgrade in progress.

Off

The ONT is in normal operation.

LAN 1 - 4

Green The network interface is connected but no data is transmitted.

Blink

Data is being transmitted or received.

Off

The device is not powered ON or data cable is not connected.

Phone 1-2x

Green The device is registered on the SS but no data is transmitted.

Blink

Data is transmitted.

Off

The device is not powered ON or fails to register on SoftSwitch.

Summary of Contents for SingNet eVolve Business Fibre Broadband


















Search results

Summary of Contents for SingNet eVolve Business Fibre Broadband

Reviews:

Related manuals for SingNet eVolve Business Fibre Broadband

Brands by name

Popular brands

SingTel SingNet eVolve Business Fibre Broadband, Troubleshooting Manual

Search results

Summary of Contents for SingNet eVolve Business Fibre Broadband

Reviews:

Related manuals for SingNet eVolve Business Fibre Broadband

Brands by name

Popular brands