3
4
Connect the ONT/ONR to a power source and switch it on. Wait for the Power and PON lights to
turn green. If your ONT Power and PON lights are blinking or red, please refer to page 7 for an
explanation of what the lights represent based on your specific device model.
Note: If the PON light continues to flicker/blink after 2 minutes, switch off the ONT and repeat steps
1 to 3. Ensure that the fibre cable is firmly plugged into the ports on the FTP and the ONT.
5
Use an RJ45 Ethernet cable to connect LAN 1 port on the ONT/ONR to the Internet / Ethernet /
WAN port of the Wireless Router.
6
Connect your Wireless Router to a power source and switch it on. Wait for Power and Internet lights
to turn green. Do refer to page 13 onwards for an explanation of what the status lights represent
based on your specific router model. If you need to reboot, please follow the instructions provided
for your router model.
