12
To change a parameter within the lower menu choices choose the required
item by aligning the left arrow with it and press the
Select
button. The
parameter will either toggle between the available options (e.g. On or Off)
or will show a menu bar where to can select more options via the
Adjust
control. Once you have chosen the setting you require press the
Select
button to return to the menu choices.
The
Adjust
control is also used to set the parameter values. Once set the
required value, press the
Select
button to retain that value and return to the
menu.
To return to the top level menu scroll down the menu choices using the
Adjust
control; the last one before the up arrow will show
Exit
. Select this
by pressing the
Select
button and you will return to the top level menus.
Summary of Contents for SM02
