Singer SGR-600LED, Instruction Manual

Page: 7 / 36

7
ENGLISH
ON/OFF switch
Plug in the appliance and press down the ON/OFF switch, a “D” sound of buzzer will be heard
and the power indicator will be illuminated, also the low steam rate is set as the default option
and its indicator will
fl ash. Press down the ON/OFF switch for 2 seconds, with a “D” sound of
buzzer, both the power indicator and steam indicator will be extinguished, and the appliance will
be disconnected from the power supply.
Temperature dial
Turn the dial to set ironing temperature to meet the garment changed.
Temperature indicator
When the iron is heating up, the temperature indicator will be illuminated. Once the iron has
reached the selected temperature, it will extinguish. The temperature indicator will be turning on
and off as the iron maintains the selected temperature during ironing.
Steam switch
The steam rate can be selected low, medium or high with one button operation. You can select
your desired steam rate by pressing the “Steam switch”. And there are three corresponding
indicators to indicate the steam rate you have selected. The default setting is low steam rate.
When one of them is selected, its indicator will
fl ash, after a few minutes, the indicator will start
illuminating. At this time, the appliance can produce steam and then you can use it for ironing.
Steam control button
After pressing down the ON/OFF switch and choosing the desired steam rate, it indicates
the steam can be used for ironing until the steam rate indicator is changed from
fl ashing to
illuminating. At this time, press the steam control button with a little force, the steam will be
sprayed from the soleplate continuously. When loosen the steam control button, the appliance
can only be used for dry ironing without steam.
Lack of water indicator
If less water in the tank, the indicator will be illuminated, following with two “D” sounds of buzzer,
then the steam generator stops working. It prompts you to add water into the tank.
Descaling indicator
If the descaling indicator is illuminating, it indicates the steam generator shall be cleaned
by virtue of the mineral deposits. When the system ensures the mineral deposits have been
removed, the indicator will be extinguished.
Drain water cap
Open the cap for cleaning the steam generator (see Fig. 4).