Singer SGR-18100, Instruction Manual

Page: 12 / 43

12
ENGLISH
The iron does not produce
any steam.
There is not enough water
in the detachable water
tank
Fill in the detachable
water tank
The steam pilot light is
still off Wait until the steam pilot
light goes on
The selected ironing
temperature is too low for
steam ironing
Set the temperature
higher than
●●
The detachable water
tank has not been prop-
erly attached to the steam
tank.
Attach the detachable
water tank to the steam
station properly
Water droplets come out
of the soleplate
The selected tempera-
ture is too low for steam
ironing.
Set the temperature
higher than
●●
When you start steam
ironing and when you
stop steam ironing for a
while, the steam that was
still present in the cord
hose will have cooled
down and condensed into
water, which causes water
droplets to come out of
the soleplate.
This is perfectly normal.
Hold the iron over an old
cloth and press the steam
activator when you start
ironing (again). Wait until
steam instead of water
comes out of the sole-
plate.
Smoke comes out of my
new iron when I switch
it on.
Some parts of the appli-
ance have been lightly
greased in the factory and
may initially give off some
smoke when heated.
This phenomenon is
perfectly normal and will
cease after a short while.
The appliance produces a
pumping sound Water is being pumped
into the steam tank
This is normal.