5
ENGLISH
OPERATING INSTRUCTIONS
1. Before using the heater please check the following:
• The heating wire and electric wire are not broken.
• Do not use the heater in a socket lower than 10A for fear of any accident.
2.
Before using the heater make sure that it is on a
fl
at and stable surface. Damage may occur
if it is placed on an incline or decline.
3. On the power knob there are 3 selections:
•
“
” is fan working
• “I” is 1000W and fan working
• “II” is 2000W and fan working
4.
There is a thermostat knob for adjusting heating. You can rotate the knob to get your de-
sired heating level.
5. The heater is equipped with an overheat protection system that shuts off the heater when
parts of the heater are getting excessively hot.
6.
When you stop using the fan heater, turn the power switch & the thermostat knob to the off
position and remove plug from the socket-outlet.
7.
If you want to move the fan heater, please turn the power switch & the thermostat knob to
the off position and remove plug from the socket-outlet.
OVERHEAT PROTECTION
This heater is protected with overheat protection that switches off the appliance automatically
in case of severe overheating. In this case, unplug the appliance, wait about 30 minutes for it to
cool and remove any possible cause of overheating, e.g. something covering the heater. Check
for damage to the appliance, the cord and the plug. If there is no damage, plug the unit back
in and switch it on as described above. If the heater still does not turn on, please contact any
SINGER Service Centre or SINGER Client Service.
MAINTENANCE
1.
Always remove the plug from the socket-outlet and allow the heater to cool down before
cleaning it.
2.
Strictly prohibit using water to wash the appliance; it can be cleaned by a piece of soft damp
cloth with a little neutral detergent. Please do not use other solvent like gasoline.
3. The fan heater must be used or stored after cooled and dried completely
4.
To store away the heater, put the heater back into its original package and store it in a clean
dry place.
