Singer SFC-1810D, Instruction Manual

Page: 7 / 24

7
ENGLISH
3. Press Set Delay button again and the word Time shows on top-left corner of the display.
4. Set the delayed starting time by pressing Hour and Minute button repetitively, that is 13:03(see
Fig. 2).
5. After setting the presetting time, press the Set Delay button once, the letter TIMER on the
LCD will disappear. The LCD will display the current clock. The unit will begin to brewing
coffee when the delayed brew time comes.
6. The indicator will illuminate blue.
Note: You may cancel the automatic start function by pressing on/
off button once to stop machine, if you want to brew coffee again
immediately, you shall press on /off button once to start brewing
immediately. If you want to change the automatic start time, you only
need to follow steps 1-4 that mentioned above.
When the time is due the indicator will illuminate green, then the unit
starts brewing. The blue background indicator will be distinguished
after brewing for 15mins and the display will show the current time, if
it has not been manually disconnected at the completion of brewing.
MEMORY
If the power supply has been broken off or the power cord has been unplugged unintentionally
during operation, the appliance will continue the previous operation automatically from the point
that the disconnection occurred, even without pressing any button, provided that the pause does
not exceeds 10s. In the event the pause time exceeds 10s, the display shows the default setting,
the appliance must be re-started.
CLEANING AND MAINTENANCE
CAUTION: Be sure to unplug the appliance before cleaning it. To protect against electrical
shock, do not immerse the cord, plug or unit in water or any other liquid. After each use, always
make sure plug is removed from wall outlet.
1) Clean all detachable parts after each use in hot water.
2) Wipe the product’s exterior surface with a soft damp cloth to remove stains.
3) Water droplets may buildup in the area above the funnel and drip onto the product base
during brewing. To control the dripping, wipe off the area with a clean dry cloth after each use.
4) Use a damp cloth to gently wipe the keeping warm plate. Never use abrasive cleaner to clean
it.
5) Replace all parts and keep them for next use.
REMOVING MINERAL DEPOSITS
To keep your coffee maker operating ef fi ciently, you should clean away the mineral deposits left
by the water regularly, according to the water quality in your area and the frequency use of the
appliance, the detail is as follows: