Singer Sewing Machine, Instruction Manual

Page: 33 / 39

Getting Ready to Sew
Winding the Bobbin
1 Thread comes off the top of the cone to thread stand arm
2 Thread through the thread post
3 Wrap thread around the bobbin tensioner as shown
4 Release the clutch prior to winding bobbins
5 Run thread through the side of the bobbin and place bobbin
on post. Push post to the right and power machine to wind
bobbin.
KEY NO. PART NO. PART NAME QTY.
1 W042 PRESSER BAR LIFTER 1
2 W042–3 PRESSER BAR LIFTER HINGE SCREW 1
3 W026 LIFT BAR 1
4 W052–2 UPPER LIFT BAR SCREW 1
5 W042–1 SPACER 1
6 W026–1 LIFT BAR GUIDE SCREW 1
7 W018 PRESSER BAR TRACK 1
8 W018–1 PRESSER BAR TRACK HINGE SCREW 1
9 W020 REAR PRESSER BAR BRACKET 1
10 A029 REAR PRESSER BAR SET SCREW 2
11 W018–2 PRESSER BAR TRACK GUIDE SCREW 1
12 W018–3 PRESSER BAR TRACK FEED STUD 1
13 W019–1 PRESSER BAR LOAD SPRING (REAR) 1
14 W019 REAR PRESSER BAR 1
15 W017 OUTSIDE PRESSER FOOT BRACKET 1
16 B010 OUTSIDE PRESSER FOOT BRACKET SCREW
OUTSIDE PRESSER FOOT SET SCREW
2
1
17 W013 OUTSIDE PRESSER FOOT 1
18 W024 PRESSER BAR ACTUATOR 1
19 W020–2 FEED SCREW RING 1
20 W020–1 PRESSER BAR ACTUATOR FEED SCREW 1
21 W041 END PLATE 1
22 W041–1 END PLATE SET SCREW 2
23 W014 OUTSIDE PRESSER FOOT BRACKET LIMITER 1
24 C097 BRACKET LIMITER SET SCREW 2
25 W036 PRESSER BAR FEED ROD 1
26 W024–1 PRESSER BAR ACTUATOR SPACER 1
27 W022 END PLATE BEARING SET PLATE 1
28 W041–2 RIVET 3
29 W021 BEARING BRACKET BUSHING 2
30 W023 LIFT CRANK ROD BEARING BRACKET PLATE 2
31 W052 ROCKER END SET RING 1
32 W052–1 ROCKER SET RING SET SCREW 2
33 W033 PRESSER BAR ACTUATOR UP–DOWN ROCKER 1
34 WO34 PRESSER BAR ACTUATOR FEED ROCKER 1
35 W–35 CRANK ROD ROCKER 1
36 W053 CRANK ROD 1
37 D097 PRESSER BAR ACTUATOR UP–DOWN ROCKER SET SCREW 2
38 W034–3 CRANK ROD ROCKER SET SCREW
PRESSER BAR FEED ROCKER SET SCREW
2
2
39 W046–2 CRANK ROD ROCKER GUIDE SCREW
UP–DOWN ROCKER GUIDE SCREW
1
1
40 W046–3 CRANK ROD ROCKER LOCK SPACER
UP–DOWN ROCKER LOCK SPACER
1
1
41 W046–4 CRANK ROD ROCKER LOCK WASHER
UP–DOWN ROCKER LOCK WASHER
1
1
42 A061–B CRANK ROD ROCKER LOCK NUT
UP–DOWN ROCKER LOCK NUT
1
1
GROUP 5
8 33
If the clutch does not engage
or disengage properly, follow
the instructions on how to
reset the clutch.
1
2
3
5
4