Singer SDHM-16L-55DIA, Instruction Manual

Page: 14 / 60

14
ENGLISH
• Drain the water tank completely when the water tank is full and reset your
setting.
• If the water tank is dirty, clean with cool or warm water. Do not use cleaners,
steel wool, chemical rag dusters, gas oil, benzene, thinner or other solvent
to clean it because they will damage the water tank and lead to leakage.
• When you put the water tank back to the unit, please use two hands to push
the water tank into the device to the correct position. Otherwise the water
full indication will still show red and the device will not work.
Continuous drainage
1. Open the cover on the back of the dehumidi fi er.
2. Take out the water tank.
3. Insert a PVC pipe with inner diameter 9.5m and length 300mm (recom-
mended); put the other side of the pipe into a container, such as a bucket.
Steps:
14
1. Remove the plastic part
at this point of the device.