Singer SDHM-16L-55DIA, Instruction Manual

Page: 11 / 60

11
ENGLISH
2. Timer button
Timer boot: press the Timer button to set up the auto-start time while the
device is on standby (you can choose between 1-24hours a cycle). The Timer
symbol will
fl ash for 5 seconds. If no further operation is instructed, the device
will quit the setting mode automatically. LED will show the set time and the
countdown will start. The device will start dehumidi
fi cation automatically when
the countdown will end. At that time, LED will show the humidity number in-
stead of the time.
Timer shutdown: Press the Timer button while the device is working to set
up the auto-stop time (you can choose between 1-24hours a cycle). LED will
show time and the Timer symbol will
fl ash for 5 seconds. If no further opera-
tion is instructed, the device will quit the setting mode automatically. LED will
switch to humidity number. LED will show the set time and the countdown will
start. When the countdown ends, LED will show “--” and the machine will stop
without making any buzzing alert.
Note: the Timer does not have a memory function. Please set up the timer
manually every time.
3.
y
button
Press this button to adjust humidity as following (the initial humidity is 60%).
You can set the humidity as you want; 20%-25%-30%-35%-40%-45%-50%-
55%-60%-65%-70%-75%-80%. The machine will stop automatically when the
indoor humidity is lower than the set humidity.
4. button
Press this button to adjust humidity (the default humidity is 60%). You can
reduce the humidity as you want; 80%-75%-70%-65%-60%-55%-50%-45%-
40%-35%-30%-25%-20%. The machine will stop automatically when the in-
door humidity is lower than the set humidity.
Note: When the humidity setting terminates, the display screen will show am-
bient humidity after fl ashing for 3 seconds. While in default mode, press “+”
or “-” button to show the setting of humidity. Press these two buttons again to
set humidity according to your preference. If you press “+” button continuously,
you will see the current ambient temperature. After showing the ambient tem-