Singer SDHM-10L SMART OUT, Instruction Manual

Page: 18 / 60

18
ENGLISH
TROUBLESHOOTING
Before contacting the service, review this list which includes common incidents
that are not result of a defect in the device.
Problem Possible Cause Solution
Not working
No power supply
Connect to a function-
ing outlet and switch on
Water Full Indication
Flashes
Drain water tank and
reset it, or re-position
the water tank to right
place
Small dehumidifying
capacity
Is the air fi lter clogged?
Clean the air fi lter as
instructed
Is the intake duct or
discharge duct ob-
structed? Remove the obstruction
from the discharge duct
or intake duct.
Loud noise when run-
ning
Is the machine put in
the plat place? Put the machine on the
plat ground
Is the fi lter clogged? Wash the fi lter
Stop operation dur-
ing the dehumidifying
process Whether the room
temperature is too high
or too low.
The dehumidi fi er may
start automatically
when the room tem-
perature be normal
The clothing cannot be
dry fast Whether the room tem-
perature is very low
The wet clothing may
dry more slowly in low
temperature
PRODUCT REPAIR FOR APLLIANCES CONTAINING R290
Warnings
• Do not exceed impedance greeter than 0.236ohm in supply the appli-
ance is connected to. Failure to comply may lead the supply authority
to impose restrictions to connection. Please consult your energy supply
authority if the use of equipment exceeds 0.236 ohm.