16
WRITING DESIGN
TO SMART MEDIA CARD
The design is finished. Send it to the SmartMedia Card in the Converter Box.
1. Place SmartMedia card into the right slot of the Converter Box with the
notched corner to the right (brass rectangle facing up).
2. From the Main Menu, click on
File: Write to Converter
.
3. In
the
Save Design
dialog box, click on the
Smart Media card
icon.
4. Click
on
Initialize
(Format successful; OK).
It is recommended to initialize the SmartMedia Card the first time using it.
NOTE: Initializing the card will remove everything on the card.
5. Click
on
Save in New Page
.
6. When the data of the design has all been transferred to the Smart Media
Card, the message;
Design successfully written
appears; click
OK
.
Attention should be given
not to interrupt any copy/read/write
procedure of
the PSW Converter. Green light flashing
shows data is still being transferred.
Taking the card out before it has finished the procedure could lead to malfunction
of the card. Use the CANCEL button on the Converter to stop the data transfer
and then remove the card.
READING DESIGN
FROM SMARTMEDIA CARD
1. From the Main Menu, click
File: Read from Converter
.
2. Double click on the
SmartMedia card
icon, and a list of
Pages
appears.
3. Double click on a
Page
; a list of
Tags
appears (there are 5 Tags in a
Page).
4. The
Tags
will each display up to 8 designs; double-click on the design.
5. Design is now open and ready for editing.
Summary of Contents for PROFESSIONAL SEW-WARE 2.00A
Page 1: ......