Singer PROFESSIONAL SEW-WARE 2.00A, Manual, Page: 13 / 33

11
20. Click the right mouse to access pop-up menu.
21. Click left mouse on Build Stitches .
22. Go to Horizontal toolbar and select Next Color , to add a color stop.
23. Place mouse pointer inside the left inner ear of bear; click left mouse to
outline the fill area of left inner ear.
24. Click right mouse to access pop-up menu.
25. Click left mouse on Build Stitches .
26. Place mouse pointer inside the right inner ear of bear; click left mouse to
outline the fill area of right inner ear.
27. Click right mouse to access pop-up menu.
28. Click left mouse to Build Stitches .
EDITING THE STITCH BLOCKS
Autotrace works differently with various types of image files. Therefore, at times
it may be necessary to adjust reference points once the autotrace procedure is
complete.
1. Select Edit: Edit Outlines from the Main Menu.
2. Place the mouse pointer within the bear body area; click the left mouse
once to bring back the fill area reference points.
3. From the Edit toolbar, click on Edit Outlines icon (the prompt line will read
‘edit the outline’).
4. From the Vertical toolbar, select Zoom ; click and drag the mouse to draw
a ‘box’ around the left arm of the bear, so that the reference points are
seen more easily.
5. Begin moving the fill area reference points: click the left mouse onto a
reference point, move the point, and click left again to set it into place;
continue on through the design, moving points as required.
6. If extra reference points need to be added (for making more accurate
outlining of the fill area), click the right mouse to access pop-up menu;
click left mouse on
Insert Point .