13
Cleaning the Soleplate
In normal use, a coating may build up on the soleplate from starch, detergent
or burnt synthetic fibers. This can be easily removed by using a quality iron
soleplate cleaner.
When the iron is cold and unplugged, the iron can be cleaned with a damp cloth
and wiped dry.
NOTE
:
Never use abrasive household cleaners or other chemical agents to
clean the iron.
Never use sharp or rough objects to remove deposits on the soleplate.
TROUBLESHOOTING
PROBLEM
REASON & SOLUTION
Iron does not heat
• The iron is not properly plugged in
• The temperature setting is too low – set the temperature
to a higher setting
• Auto-Off has been engaged – move or shake the iron
gently to de-activate Auto-Off
No steam or not enough
steam
• The water tank may be low or empty – add water
• The iron is not set to steam setting – for maximum steam,
temperature should be on
or
MAX
Iron is emitting small
particles or odor
• This is normal – follow instructions for first time use
• Water may need to be changed
• Buildup of mineral deposits inside steam chamber – see
Self-Cleaning section
Iron is dripping water
from steam vents
• Overfilled – do not fill past the MAX line on water tank
• The iron may not be hot enough – set the temperature
to
or
MAX
• Overuse of Burst of Steam – allow more time between
bursts
If troubleshooting does not solve the problem, please call SINGER
®
at
1-800-4SINGER (1-800-474-6437).
