background image

III

 - Do not use the machine if it is wet.

 - If the LED lamp is damaged or broken, it must be replaced by the manufacturer or its service 

agent or a similarly qualified person, in order to avoid a hazard.

 - If the cord connected with the foot control is damaged, it must be replaced by the 

manufacturer or its service agent or a similarly qualified person, in order to avoid a hazard.

 - This sewing machine is provided with double insulation. Use only identical replacement parts. 

See instructions for Servicing of Double-Insulated Appliances.

SAVE THESE INSTRUCTIONS

FOR CENELEC COUNTRIES ONLY:

This appliance can be used by children aged from 8 years and above and persons with reduced 

physical, sensory or mental capabilities or lack of experience and knowledge if they have been 

given supervision or instruction concerning use of the appliance in a safe way and understand 

the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance 

shall not be made by children without supervision.
The noise level under normal operating conditions is less than 75dB(A).
The machine must only be used with foot control of type FC-2902D, (220-240V) manufactured 

by Zhejiang Founder Motor Corporation, LTD. (Vietnam) / 4C-326G (230V) / 4C-336G (240V) 

manufactured by Wakaho Electric Ind. Co., Ltd. (Vietnam).

Summary of Contents for MX231









































Reviews: