Singer HD0405S, Instruction Manual

Page: 24 / 56

3,5
/ Rolled hem
(When shipped
from factory.)
Push
Width adjustment knob
Caution:
Before making adjustments, be sure to turn off
power switch
Opening the looper cover will make adjustment
easier.
Push the upper knife to the right and while maintain
the knife in this position,turn the knob away to adjuste
the desired seam width,using te graduations on the
throat plate as a guideline.
Caution:
Always close looper cover before operating
machine.
preadjusted at the factory to suit the sewing of
medium weight fabrics.
Most of the materials do not require adjustment of
presser foot pressure however, there are some
instances where adjustment is necessary when
sewing lightweight and heavyweight fabrics.
(A) in top cover and into slot (B) in pressure
required.
Note: Turn regulating screw counterclockwise until
it stops against the top cover. Then turn
screw clockwise 6 turns which will be the
standard presser bar pressure.
For lightweight fabric … Decrease the pressure
For heavyweight fabric … Increase the pressure
15. HOW TO ADJUST THE PRESSER
FOOT PRESSURE
The presser foot pressure of this machine is
In such case, insert screwdriver through access hole
regulating screw and turn regulating screw as
22