8
Stop machine and move bobbin winder lever to the left.
9
Cut connecting thread about three inches from bobbin and remove bobbin from
spindle.
10
Tighten stop-motion screw with right hand while holding handwheel with left
hand.
IF THREAD DOES NOT WIND EVENLY
1
Loosen tension bracket screw.
2
Lower bracket if too much thread
is wound on top of bobbin.
3
Raise bracket if too much thread is
wound on bottom of bobbin.
4
Tighten tension bracket screw.
TO CONTROL AMOUNT OF THREAD ON
BOBBIN
1
Loosen stop latch screw.
2
Move stop latch to left for less
thread on bobbin.
3
Move stop latch to right for more
thread on bobbin.
4
Tighten stop latch screw.
7
