THREADING THE MACHINE (continued)
regulating
the machine for
your fabric
As you get ready to sew, take ad-
vantage of the flexibility of your
sewing machine. With a choice of
needle sizes and four easy-to use
selectors for stitch length, pressure,
feed height, and needle-thread ten-
sion, you can adjust the machine to
sew perfectly on a wide variety of
fabrics. The table on page 13 will
guide you in selecting correct thread,
needle sizes, and stitch length accor-
ding to the weight of your fabric. Be
sure to use like threads for both
needle and bobbin.
CHANGING THE NEEDLE
1
Turn hand wheel over toward you
until needle is at highest position.
2
Loosen needle-clamp screw and
remove needle.
3
Insert new needle into clamp with
the flat side of the needle to the
right and the
long groove to the
left;
push it up as far as it will go.
4
Tighten needle-clamp screw.
This machine uses needle Catalog
2020 (15x1), available in sizes 9,
11, 14, 16, and 18.
12
